What's new
PGBlitz.com

Register Now! Find useful tips, Interact /w Community Members and join the part the Best Community on the Internet!

Discussion RAID with Oneprovider (OVH Mtl)

dubud

Junior Member
Got the server yesterday and ask them 16GB for swap and the rest for the main partition

look what I got .....

Code:
Filesystem      Size  Used Avail Use% Mounted on
/dev/root        20G  5.4G   13G  30% /
devtmpfs         16G     0   16G   0% /dev
tmpfs            16G     0   16G   0% /dev/shm
tmpfs            16G   21M   16G   1% /run
tmpfs           5.0M     0  5.0M   0% /run/lock
tmpfs            16G     0   16G   0% /sys/fs/cgroup
/dev/md2        487M   22M  437M   5% /boot
/dev/md4        1.8T   68M  1.7T   1% /home
I made a mistake with my req or they just setting up the disk incorrectly ?
 

dubud

Junior Member

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdb 8:16 0 1.8T 0 disk
├─sdb4 8:20 0 1.8T 0 part
│ └─md4 9:4 0 1.8T 0 raid1 /home
├─sdb2 8:18 0 511M 0 part
│ └─md2 9:2 0 511M 0 raid1 /boot
├─sdb5 8:21 0 7.8G 0 part [SWAP]
├─sdb3 8:19 0 19.5G 0 part
│ └─md3 9:3 0 19.5G 0 raid1 /
└─sdb1 8:17 0 1004.5K 0 part
sda 8:0 0 1.8T 0 disk
├─sda4 8:4 0 1.8T 0 part
│ └─md4 9:4 0 1.8T 0 raid1 /home
├─sda2 8:2 0 511M 0 part
│ └─md2 9:2 0 511M 0 raid1 /boot
├─sda5 8:5 0 7.8G 0 part [SWAP]
├─sda3 8:3 0 19.5G 0 part
│ └─md3 9:3 0 19.5G 0 raid1 /
└─sda1 8:1 0 1004.5K 0 part


---- Automatically Merged Double Post ----

look like unionfs use the / and not /home
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 20026172 6139948 12845896 33% /
devtmpfs 16421072 0 16421072 0% /dev
tmpfs 16456188 0 16456188 0% /dev/shm
tmpfs 16456188 20872 16435316 1% /run
tmpfs 5120 0 5120 0% /run/lock
tmpfs 16456188 0 16456188 0% /sys/fs/cgroup
/dev/md2 498468 21513 446699 5% /boot
/dev/md4 1893987968 69092 1797686792 1% /home
gdrive: 1099511627776 0 1099511627776 0% /mnt/gdrive
unionfs 20026172 6139948 12845896 33% /mnt/unionfs
 
Last edited:

OOO

Full Member
Looks like that setup won't be too useful as plexguide uses /opt and /mnt by default for all locations, and your provider has mounted the drive in /home. I wrote about this a while back in another post here

---- Automatically Merged Double Post ----

Relevant bit:

Notice that Plex Guide uses /mnt for downloads and unionfs and /opt for config data of applications (including plex transcoding)
 
Last edited:

dubud

Junior Member
What I need to change in my fstab to make it work ?

Code:
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
/dev/md3        /       ext4    errors=remount-ro,relatime      0       1
/dev/md2        /boot   ext4    errors=remount-ro,relatime      0       1
/dev/md4        /home   ext4    defaults,relatime       1       2
/dev/sda5       swap    swap    defaults        0       0
/dev/sdb5       swap    swap    defaults        0       0
proc            /proc   proc    defaults                0       0
sysfs           /sys    sysfs   defaults                0       0
devtmpfs        /dev    devtmpfs        rw      0       0
 

OOO

Full Member
Oneprovider are legendary... and not in a good way.
Yup, I was forced to learn about this on my move away from Oneprovider, SoYouStart has been far superior.

What I need to change in my fstab to make it work ?

Code:
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
/dev/md3        /       ext4    errors=remount-ro,relatime      0       1
/dev/md2        /boot   ext4    errors=remount-ro,relatime      0       1
/dev/md4        /home   ext4    defaults,relatime       1       2
/dev/sda5       swap    swap    defaults        0       0
/dev/sdb5       swap    swap    defaults        0       0
proc            /proc   proc    defaults                0       0
sysfs           /sys    sysfs   defaults                0       0
devtmpfs        /dev    devtmpfs        rw      0       0
Change the mount point of md4 to either /opt or /mnt. md4 because of the info posted above about it being the larger drive
 

dubud

Junior Member
like that ?

Code:
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
/dev/md3        /home       ext4    errors=remount-ro,relatime      0       1
/dev/md2        /boot   ext4    errors=remount-ro,relatime      0       1
/dev/md4        /   ext4    defaults,relatime       1       2
/dev/sda5       swap    swap    defaults        0       0
/dev/sdb5       swap    swap    defaults        0       0
proc            /proc   proc    defaults                0       0
sysfs           /sys    sysfs   defaults                0       0
devtmpfs        /dev    devtmpfs        rw      0       0
 

ItsJustDay

Junior Member
Did this work for you? I am having the same issue with my OneProvider server

like that ?

Code:
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
/dev/md3        /home       ext4    errors=remount-ro,relatime      0       1
/dev/md2        /boot   ext4    errors=remount-ro,relatime      0       1
/dev/md4        /   ext4    defaults,relatime       1       2
/dev/sda5       swap    swap    defaults        0       0
/dev/sdb5       swap    swap    defaults        0       0
proc            /proc   proc    defaults                0       0
sysfs           /sys    sysfs   defaults                0       0
devtmpfs        /dev    devtmpfs        rw      0       0
 

clinch123

The Newb
ItsJustDay can you post the output of "fdisk -l" and "df -h". Depending on how they set you up, you may need to do something else. When I asked for 2x2TB they set one HD up as / and /home and left the other HD just sitting there useless
 

khuong

Noob
you don't need to edit your fstab at all...

you can just move opt and /var/lib/docker into the biggest partition.. and then create symlinks to it..

i.e as root.. or every command with sudo.. with all docker images stopped..

mv /opt /home/opt
mv /var/lib/docker /home/docker
ln -s /home/opt/ /opt
ln -s /home/docker /var/lib/docker
 

efire95

Junior Member
Hey guys,

Did anyone figure out a solution with this? I am having trouble figuring this out. Any help would be appreciated.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Similar threads


Development Donations

 

Top NZB NewsGroups!

Members - Up To a 58% Discount!

Trending

Online statistics

Members online
16
Guests online
104
Total visitors
120
Top