7.5 Changelog

Status
Not open for further replies.

Admin9705

Administrator
Original poster
Project Manager
5,296
1,799
Team, 7.5 is going to focus on container rewrites and wiki upgrades.  This list will keep a list of the work completed.

Fixes for 7.5.13

Repair and updated rutorrent.  Appeared to be unusable prior.  Deploys and made several tweaks.  Please uninstall prior one with pgbox app removal and reinstall.  Paths have not changed, so if you are happy with your current one; it will run as is until you remove the older version.
Please provide feedback or any issues that you have!


Fixes for 7.5.12

Adjusted lidarr to new format.  Please read warning in 7.5.11. For lidarr, backup, use pgbox to remove and reinstall; then configure.


Fixes for 7.5.11

Tweaked pgblitz to upload every 30 seconds
Fixed Sonarr / Radarr / NZBGET / SABNZBD to run in natural format to cut out permission issues form the past; did 3 clean tests to ensure.
Tweaked a few visual outputs
Please review Beta 7.5.5 – 7.5.10 below for additional fixes
Please backup your data incase as always!
TIP – If...
Continue reading...
 
Last edited:

introvertmouse

Blitz 1st Class
77
32
is that the wife and dog in the pic ?


p.s. i would buy that hoodie / tshirt
 
Last edited by a moderator:

Admin9705

Administrator
Original poster
Project Manager
5,296
1,799
let me know how it works out :D doing 2 more checks, then out with .10 - some minor changes have already been made. A 7.5 build has not been out yet. They come out as i make any changes.
 

IMDMonkey

Blitz 3rd Class
Staff
22
12
Sorry to put this in the 7.5 changelog, but I noticed that with the new rewrite of the PGMove to create the rclone config, it is no longer asking some key questions, like root folder value. This means I now have to go in and hand edit the config file to put it back, otherwise it breaks everything on the system. It might be a good value to add OR to add an advanced configuration menu for rclone/gdrive where people can post keys. Plus, it removed the other drive that I was using for additional backups outside of Gdrive (onedrive) so I have to either create a new rclone config (no issue, really) or hand edit, again.

It would be nice to add additional "backup" locations (OneDrive, Box, Dropbox, etc.) that are supported by rclone as an "advanced" feature, too. Just my 2 cents....

Thank you, again, for all the hard work.
 
  • Like
Reactions: Admin9705

Admin9705

Administrator
Original poster
Project Manager
5,296
1,799
Sorry to put this in the 7.5 changelog, but I noticed that with the new rewrite of the PGMove to create the rclone config, it is no longer asking some key questions, like root folder value. This means I now have to go in and hand edit the config file to put it back, otherwise it breaks everything on the system. It might be a good value to add OR to add an advanced configuration menu for rclone/gdrive where people can post keys. Plus, it removed the other drive that I was using for additional backups outside of Gdrive (onedrive) so I have to either create a new rclone config (no issue, really) or hand edit, again.

It would be nice to add additional "backup" locations (OneDrive, Box, Dropbox, etc.) that are supported by rclone as an "advanced" feature, too. Just my 2 cents....

Thank you, again, for all the hard work.
ya the way it's written is so it works for most users. people normally screw up the rclone process, but will post advanced instructions for people to configure, meaning you would just type

rclone config --config /opt/appdata/plexguide/rclone.conf and you can still run the process as you have done before. what matters in the end is that gdrive and the tdrive value is there. pgblitz or move will deploy.

here you go: https://github.com/Admin9705/PlexGuide.com-The-Awesome-Plex-Server/wiki/RClone-Manual-Deploy
 
Last edited:

mondychan

Blitz 3rd Class
13
8
i was keeping Version: 7.2.4 on my main server for some time, while the PG-rewrite was taking place,
do you think its smart to update to 7.5 now? should i expect everything to break?
 

Admin9705

Administrator
Original poster
Project Manager
5,296
1,799
i was keeping Version: 7.2.4 on my main server for some time, while the PG-rewrite was taking place,
do you think its smart to update to 7.5 now? should i expect everything to break?
Will work but you will have to create a new rclone config if you redeploy blitz or move
 

mondychan

Blitz 3rd Class
13
8
updated from version: 7.2.4 straight to version: 7.5.1 , redeployed blitz unecrypted, all seems fine! fantastic work!

edit: i can read all my google files fine, but seems like its not uploading anything , sgdrive/stdrive/sunionfs/spgblitz all seem to be running, yet there is no "Activity" going on, pgchecker.bin gets created when deplyoing fine too

15:47 was before update then did the update and everything deploys sucesfully, services running, yet nothing gets uploaded

1544628099727.png

rebooted the system, re-redeployed the gpbliz, same

if i run /opt/appdata/pgblitz/pgblitz.sh manually, i get this output

1544628517601.png
yet the folders are there

1544628540283.png
dunno if thats eve the case of this problem, but i quess it could be ?

edit2: fixed by using the build in menu tool to move download paths to different HDD - it was unrelated test as i wanted to move downloads from the main SSD and it fixed the problem :)

edit3: moving to secondary hdd introduced more problems that it fixed, reverted my snapshot back to version: 7.2.4 , no more time to fiddle with it :(

edit4: after restoring the snapshot yesterday i jumped into it again today and everything went smooth, did the exact same process, so yea, if it doesnt work for you, just restore and try again !
 
Last edited:

thepj

Blitz Sergeant
Staff
106
53
@Admin9705 just a suggestion, but I would recommend a change on https://github.com/Admin9705/PlexGuide.com-The-Awesome-Plex-Server/wiki/NZBGET to read like this for the first paragraph to be more accurate:

Current
A newsgroup / torrent managing program that downloads NZBGET files and works normally in conjunction with programs such as Sonarr, Radarr, and Lidarr to track, download, extract, and complete the assembly of a requested file. NZBGET is known for it's stability and is a top recommended for use of PlexGuide over SABNZBD.
Updated
A program that manages and downloads NZB files from Usenet Newsgroups and works in conjunction with programs such as Sonarr, Radarr, and Lidarr to track, download, extract, repair, and complete the assembly of a requested file. NZBGET is known for it's stability and is a top recommendation for use with PlexGuide over SABNZBD.
Just my 2cents, helps it be clearer and more concise.
 
  • Like
Reactions: Admin9705

IMDMonkey

Blitz 3rd Class
Staff
22
12
You might want to check on the mass restore option. I am getting this on a fresh system.
Code:
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
[IMG]https://s.w.org/images/core/emoji/11/svg/2198.svg[/IMG]  NOTE: Determing File Size - plex.tar
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
2018/12/13 18:37:04 NOTICE: Config file "/root/.config/rclone/rclone.conf" not found - using defaults
2018/12/13 18:37:04 Failed to create file system for "gdrive:/plexguide/backup/BadBeaver": didn't find section in config file
expr: syntax error
The good news is that it continues on after the error.

Also, this message is a little interesting.
Code:
TASK [Downloading from Google YesDrive - plex.tar - Size:  MB] ***************
What is Google YesDrive? ;)
 
Last edited:

thepj

Blitz Sergeant
Staff
106
53
You might want to check on the mass restore option. I am getting this on a fresh system.
Code:
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
[IMG]https://s.w.org/images/core/emoji/11/svg/2198.svg[/IMG]  NOTE: Determing File Size - plex.tar
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
2018/12/13 18:37:04 NOTICE: Config file "/root/.config/rclone/rclone.conf" not found - using defaults
2018/12/13 18:37:04 Failed to create file system for "gdrive:/plexguide/backup/BadBeaver": didn't find section in config file
expr: syntax error
The good news is that it continues on after the error.

Also, this message is a little interesting.
Code:
TASK [Downloading from Google YesDrive - plex.tar - Size:  MB] ***************
What is Google YesDrive? ;)

"BadBeaver"
 

Admin9705

Administrator
Original poster
Project Manager
5,296
1,799
  • Like
Reactions: thepj

tonycfromit

Blitz 1st Class
Staff
99
43
Awesome that you have added HomeAssistant, Admin! Thanks! :D

I found a couple of things I would like to ask you about:

1. I am still having issues with Plex not backing up properly, again with a subs folder on one machine and a thumbnail folder on a different server not containing data and crashing the backup.
2. The AppGuard still prevents BitWarden from running properly, It keeps popping up asking for username and password after it gets it correctly. Muximux is having issues, but it still works.
3. Are we going to get the Read Only G and T drive setup? If not, is there a way that I could mangle it manually after setting up PGBlitz to disable the blitz part and simply have the G and T available and connected with UnionFS for my Plex server?
4. Does anyone know what/how Beets is used?

Other than that, I just rebuilt 3 servers today in just a couple of hours with no major issues other than the ones mentioned above.

:coffee:PlexGuide just keeps getting BETTER AND BETTER!! :coffee:
 

Admin9705

Administrator
Original poster
Project Manager
5,296
1,799
Awesome that you have added HomeAssistant, Admin! Thanks! :D

I found a couple of things I would like to ask you about:

1. I am still having issues with Plex not backing up properly, again with a subs folder on one machine and a thumbnail folder on a different server not containing data and crashing the backup.
2. The AppGuard still prevents BitWarden from running properly, It keeps popping up asking for username and password after it gets it correctly. Muximux is having issues, but it still works.
3. Are we going to get the Read Only G and T drive setup? If not, is there a way that I could mangle it manually after setting up PGBlitz to disable the blitz part and simply have the G and T available and connected with UnionFS for my Plex server?
4. Does anyone know what/how Beets is used?

Other than that, I just rebuilt 3 servers today in just a couple of hours with no major issues other than the ones mentioned above.

:coffee:PlexGuide just keeps getting BETTER AND BETTER!! :coffee:
all to be worked out, a secret subdomain with home.domain.com is created in addition for your program.
 
Status
Not open for further replies.

Similar threads